Hangzhou Suntech Machinery Co., Ltd.
professional manufacturer of pipe tools
Add to Cart
Portable polyethylene pipe butt welder SHT160-2/4(A) for Energy & Mining
The main body supports and center the plastic pipes with two fixed and two movable clamps. operation easily and suitable for any complex work condition.The necessary electric will be transfer to the heater and milling cutter by means of this unit and to the main machine by the hydraulic pressure.Before cutting the pipe (piece), make sure that the end face of the pipe (piece) is clean and free of dirt to prevent damage to the cutting blade
Butt Fushion Welding Machine Technical data:
| item | SHT160 -2/4(A) | SHT200 -2/4(A) | SHT250-2/4(A) |
| Working Range | 63-160mm | 63-200mm | 90-250mm |
| Caliber (mm) | 63, 75, 90, 110, 125, 140, 160 | 63, 75, 90, 110, 125, 140, 160, 180, 200 | 90, 110, 125, 140, 160, 180, 200, 225, 250 |
| Heating board max temp. | 270 °C | 270 °C | 270 °C |
| Temperature bias | “+/-5° | “+/-5° | *+/-5°C |
| Heating plate power | 1.5 Kw | 1.8 Kw | 2.2 Kw |
| Power of Planning: | 0.8 Kw | 0.8 Kw/1.2Kw | 1.45Kw/2.2Kw |
| Total power | 2.3 Kw | 2.6 Kw/3.2Kw | 3.65Kw/4.7 Kw |
| 2(A) G.W./N.W.: | 35/32 kgs | 50/44 kgs | 83/70kg |
| 2(A) Packing size: | 55*47*52 cm | 67*47*53 cm | 76*55*58 cm |
| 4(A) G.W./N.W.: | 47/42 kgs | 52/46 kgs | 110/95kg |
| 4(A) Packing size: | 68*54*53 cm | 74*59*56 cm | 90*67*54 cm |
Other name:
manual welding equipment for pipe chinese products plastic pipe hdpe butt fusion welding machine socket butt fusion welder
Factory price wholesale automatic pe pipe hdpe electrofusion welding machine gf20 to 630mm
fusion welding equipment
Features:
The machine is operated by 220v±10%, 50Hz, if extended wire should be used, it should have enough lead section according to its length..1. The machine is used to weld pipes made from PE, PP, PVDF and cannot be used to weld material without description otherwise the machine may be damaged or some accident may be resulted in.
Preparation for welding HDPE Pipe manual Butt Fusion Welding Machine
1. Before operation, all equipment parts shall be placed on a stable and dry place.
2. Confirm that the power supply used meets the requirements of the equipment, the equipment is in good condition, and the electrical circuit is not damaged; the detection indicator works normally, the milling cutter blade is sharp, and the parts and operating tools are complete.
3. Replace the required fixture according to the outer diameter of the welded pipe.
Welding procedure for HDPE PIPE manual Butt Fusion Welding Machine
Application
Our service:
1) We offer 1 year warranty and free spare parts. (Except for wearing parts)
2) We offer voltage and frequency of motor customization service, such as 110v 60hz.
3) We can put your LOGO on machine plate or packing (need your authorization on brand)
4) Machine can be shipped to overseas or domestic place by sea or air in LCL or FCL.